Panasonic WX-LP100 - Manual (Page 2)

Key Features (WX-LP100)
• Integrated dual channel infrared wireless receiver
• 2 audio multimedia inputs
• Remote control of wireless microphones and multimedia sources
• Wide horizontal dispersion for even coverage
• Compact, lightweight and rugged design for flexible placement
• Interference/interception-free made possible by infrared
wireless technology
• Front panel controls for easy access
• Adjustable output for recording
• Adjustable output for assistive listening devices
Part Names and Functions (WX-LP100)
DISTRIBUTED BY:
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
http://panasonic.net/pss/irw/
Printed in Japan (1N-790)
Appearance (WX-LP100)
Rear Panel
Front Panel
Specifications (WX-LP100)
Infrared Wireless Powered Speaker Kit Optional Accessory
Infrared Wireless
Powered Speaker
WX-LP100
All-in one portable speaker
incorporating 2ch receiver,
sensor, amplifier and speaker. Hands-free pendant-style.
Equipped with volume
control buttons. Ideal for
teachers’ or presenters’ use.
* Shipped with
strap attached.
* Comes with two
WX-LT100 adaptors.
Photo shows adaptor
attached on left side.
Microphones;
option
Light weight, simple and
basic design.
Ideal for students’
or audiences’ use.
Direct connection.
Allows simultaneous charging
of two microphones.
Can also serve as power cord
for the charger stand. Can charge batteries in approx.
seven hours. Two microphones
can be charged at the same time.
Infrared Wireless Microphone
(Pendant Type)
WX-LT310
Infrared Wireless Microphone
(Hand Held Type)
WX-LT100
Battery Charger
WX-LZ110
Charger Stand
WX-LZ10
Amplifier/Receiver Unit
Power Source 24 V DC (Using the attached AC adaptor unit)
Power Consumption 450 mA
Infrared Sensor Input 75 Ω F type connector (with Sensor WX-LS100)
Output power for Sensor: 22 V DC, 100 mA Max.
Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Receiving System TRF (Tuned Radio Frequency)
Squelch Level 24 dB µV (including Sensor)
Tone Squelch Frequency 32.768 kHz
Line Input 1, 2 -12 dBV, unbalanced, ø3.5 mini jack
(L and R mixing for stereo input)
Line Output 0 dBV, unbalanced, ø3.5 mini jack
(Monaural audio output for L and R)
Volume Control* changeable microphone volume by the 2 dB step
(+6 dB ~ -16 dB) (Reset by power OFF/ON)
Speaker Type 12 cm Full Range Bass Reflex
Rated Output 6.3 W (4 Ω), Max: 10 W (4 Ω)
SPL 93 dB SPL, 1 m, 1 W
Distortion Less than 1 %
Frequency Response 100 Hz ~ 15 kHz (Line input ~ Speaker output)
Operating Temperature +5 °C ~ +35 °C
Dimensions 187 (W) x 309 mm (H) x 209 mm (D)
Weight approx. 3.7 kg
Finish AV medium gray ABS resin (similar to Munsell N7)
* Volume controllable Microphone: WX-LT310
Infrared Sensor (attached)
Power Source 22 V DC (supplied from Amplifier/Receiver unit)
Power Consumption 20 mA
Infrared Ray Wavelength 850 nm
Sensor Output 75 Ω F type connector
Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Dimensions Max. ø113.5 mm x 34.5 mm (H)
(excluding a projection for F type connector)
Weight approx. 0.2 kg
Finish Black color / Infrared ray transmission acrylic resin
187
209
65
244
Unit: mm
Sensor Input
Line Input 2
Line Input 1
Line Output
Line Output Volume Control
OPERATE
MIC 1 Volume Control
MIC 2 Volume Control
LINE 1 Volume Control
LINE 2 Volume Control