Feature access – Polycom SpectraLink NetLink DCX100 User Manual
Page 38
SpectraLink Corporation
NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 38
Feature Access
Pre-dialing All features are viewed with the handset off hook. Press the
Start
Call
button to go off hook. To dial a call, you may use predialing by
dialing the number and then pressing
Start Call
.
Line appearances Press the
Line
key to view a list of available line appearances and
their assigned extensions. To access a line and make a call, press the
corresponding key. Press the
End Call
button to exit the Line
Appearance list.
Speed Dial, Mute, Voicemail
and OAI
Press the
FCN
key while off hook to display the Mute, Voicemail
and OAI features and the first four items in the speed dial list.
Activate the feature by pressing the corresponding key as shown on
the display or by pressing the shortcut key. Press
FCN
again to scroll
through the programmed features. Press the
End Call
button to exit
the Function list.
Access programmed features Whenever the handset is active, the softkey abbreviations display.
Each feature abbreviation is shown above the corresponding
softkey. Pressing the feature’s corresponding softkey or pressing the
MENU
key plus the shortcut key will activate the feature. Press the
MENU
key for an expanded description of the softkey features. Use
the side buttons (
Up
,
Select
,
Down
) to scroll through the features.
The
Select
button will activate the selected feature. Pressing the
softkey or shortcut key will activate the feature even if it is not
selected or shown on the
MENU
display. Press the
More
softkey to
display the next set of programmed features. Press the
End Call
button to exit the Feature list.
Multiple calls per line The handset supports two calls per line. Call icons display the status
of each call to help you keep track of the calls.
Icons In order to accommodate four line appearances with two possible
calls on each, the handset display has been modified. The top row
displays the signal strength icon, the four line appearance numbers,
the voicemail indicator (replaced by the downloader icon when the
handset is downloading code), a call status icon for each call,
navigation arrows, and the battery icon as shown here:
The tabs indicate which line and which call is active. In the above
display, line one is in an active call. The second call for line one is
on hook.
Signal strength icon
Line numbers
Voicemail indicator
Call one status
Call two status
Navigation arrows
Battery icon
Tab
Tab