Pioneer CD-ROM DRIVE UNIT DR-U16S - Manual (Page 19)

19
<DRC1087>
En
DISC OPERATION
DISC REMOVAL METHOD
¶ Confirm that the BUSY indicator of the drive is not lit, and then press the Eject button (0).
¶ Remove the disc after it has been ejected.
Do not place anything within 12 cm in front of the unit as this may obstruct the disc ejection
operation of the unit.
Disc Handling
CD-ROM DISC INFORMATION/FORMATS SUPPORTED
¶ High Sierra, CD-ROM XA, (Mode 2, Form 1 and 2), Rock Ridge and, CD-DA audio Discs.
MEDIA DIAMETER
¶ 120 mm/12 cm/4.72" disc and 80 mm/8 cm/3.15" disc (always attach adapters available at stores to
8 cm discs).
HANDLING OF CD-ROM DISCS
¶ When holding discs, DO NOT touch the data surfaces (the shiny side of the disc). Hold the disc by
the edges or by one edge and the center hole.
¶ DO NOT affix labels or adhesive tape to either side of the discs. Also,
DO NOT scratch or damage the label.
DO NOT use damaged,cracked, or warped discs. If they break inside the unit, they may
damage the optics. Discs rotate at high speed inside the changing mechanism.