Finalizing a disc – Panasonic VDR-D160GN User Manual

Page 82

Advertising
background image

Dis

c

a

nd c

a

rd m

a

na

gem

e

nt

Finalizing a disc

82

LSQT1184

Finalizing a disc

(-RW‹VR›) (-RW‹V›) (-R)

If you insert a DVD-RW or a DVD-R recorded on this unit that has not been finalized in
another device such as a DVD recorder or a computer, the disc may become unusable.
Be sure to finalize the disc on this unit before inserting it in other devices.

¬Rotate the mode dial to select

.

1 Connect this unit to the AC adaptor.

≥ Finalization cannot be executed when using a battery. If the power supply stops while finalizing,

the finalization will fail and the data may be damaged. Use the AC adaptor.

2 Press the MENU button, then select [

SETUP]

#

[

FINALIZE]

# [YES] and press the joystick.

3 When the confirmation message appears, select [YES], then press the

joystick.

≥ When finalizing is complete, press the MENU button to exit the message screen.

≥ Do not finalize a disc recorded on this unit using any

other device.

≥ In the case of a double sided disc, finalize each

side.

≥ The top menu created when finalizing does not

appear on this unit. Play back the disc on a DVD
player. Titles are displayed by recording date on the
top menu. However, when [PLAY MODE] is set to
[BY DATE] to view scenes by recording date, some
scenes recorded on the same date may be
separated. (l 60) These scenes will be displayed
as separate titles on the top menu.

≥ Depending on the condition of the disc, the time it

takes for finalizing will differ. It may take up to
15 minutes.

≥ If this unit becomes hot or is shaken strongly or

impacted while finalizing, the finalization will fail and
the disc may become unplayable on other devices.

≥ If the power supply stops while finalizing, the

finalization will fail and the disc may become
unplayable on other devices even if disc repair is
carried out.

Finalizing a disc

This is for enabling discs to be played on other devices.

DVD-RAM:
≥ It is not necessary to finalize DVD-RAM.
DVD-RW (VR format):
≥ DVD-RW (VR format) after finalization can be recorded and edited in the same way as DVD-

RW (VR format) before finalization.

≥ After finalizing a DVD-RW (VR format) once, you cannot finalize it again. (Even if you record

on or edit a DVD-RW (VR format) after finalizing, it is not necessary to finalize it again.)

DVD-RW (Video format), DVD-R:
≥ After finalizing, the disc becomes play-only and you can no longer record.
≥ When you un-finalize a DVD-RW (Video format), the disc can be used for recording again.

(l 83)

LSQT1184(ENG).book 82 ページ 2007年2月5日 月曜日 午後1時29分

Advertising