Panasonic AJ-SD965P - Manual (Page 11)

11
Front panel
Parts and their functions
(continued)
R INPUT SELECT buttons
These buttons switch the video and audio input
signals. It is also possible to switch the input signals
to the internal reference signal selected on setup
menu No. 600 (INT SG).
VIDEO:
Each time the VIDEO button is pressed, the input
video signal selection is switched in the order of Y
PB PR 5 CMPST 5 SDI 5 SDTI/1394 5 SG
(SG/SG1/SG2).
O
When SG has been selected, the signal is
switched to the internal reference signal
selected on setup menu No. 600 (INT SG).
AUDIO:
Each time the AUDIO button is pressed, the input
audio signal selection is switched in the order of
ANALOG 5 AES/EBU 5 USER SET 5 SDI 5
SDTI/1394 5 SG.
O
USER SET is a function which enables the
input signals to be selected and recorded
separately on PCM audio signal channels 1
through 4, and is used in conjunction with the
setup menu.
Example:
<Notes>
O
It is possible to inhibit input switching operations
(video and audio) of the INPUT SELECT buttons
with setup menu No. 112 (V IN SEL INH) and No.
113 (A IN SEL INH).
O
Y PB PR, CMPST and SDTI/1394 cannot be
selected unless one of the optional boards (AJ-
YA931G, AJ-YAD955G) has been installed.
Settings
AUDIO button
USER SET
Setup menus
No.715 (CH1 IN SEL) : ANA
No.716 (CH2 IN SEL) : DIGI
No.717 (CH3 IN SEL) : DIGI
No.718 (CH4 IN SEL) : ANA
No.719 (D IN SEL12) : AES
No.720 (D IN SEL34) : SIF
PCM audio signals to be recorded on the tape
CH1 : Analog input signals
CH2 : AES/EBU digital signals
CH3 : SDI input digital signals
CH4 : Analog input signals
P 3.5-inch color LCD monitor
This monitor enables the output images and menu
settings to be monitored. Information such as the
time code is not displayed.
[Saving function of LCD monitor]
If none of the controls on the front panel are
operated or the cassette tape does not move at
all for about 5 minutes, the saving function is
activated, and the display vanishes from the LCD
monitor.
To release this function, either operate one of the
buttons or the dial on the front panel or issue a
tape transport instruction from the controller.
The operation performed to release the saving
function is executed without the user having to
take another step.
O
When OFF is set as the setup menu item
No.900 (LCD PROTECT) setting, the saving
function will not work.
<Note>
Although the LCD monitor has been manufactured
using technology with extremely high levels of
precision, some pixels may be missing from parts of
the screen or some pixels may remain lighted.
These missing or lighted pixels will not be recorded.
It should also be borne in mind that this is not
indicative of a malfunction.
Q Headphone jack and volume control
When stereo headphones are connected to the
headphone jack, the sound during recording, playback
or editing can be monitored using the headphones.
The volume level of the headphone output and monitor
output can be adjusted using the volume control.
Whether the volume level of the monitor output is to be
coupled to the volume control or not can be selected
using the setup menu item No. 713 (MONI OUT).
(Note that the volume level of the headphones is
coupled at all times.)
When the volume of the monitor output is not coupled,
it is fixed at a set level and is not affected by the
position of the volume control.
ON POWER
REMOTE SUPER REC INH TCG MODE
ON
OFF
DVCPRO 50
EJECT
SEARCH TC CUE VIDEO ASSEM COUNTER
CH 1 CH 2 CH 3 CH 4
PF 1 PF 2 PF 3 PF 4
RESET
PLAYER RECORDER SET
TC PRESET MENU PF
STAND BY
EDIT
A OUT
OUT IN SET
A IN PREROLL AUTO EDIT PREVIEW/ REVIEW INPUT SELECT METER
AUDIO MON SEL AUDIO MIX HEADPHONES
AUDIO VOL SEL
VIDEO
CH 1 R MIX
1&2
CH1/3
PULL
CH2/4 REC CH1/3
CH1/3 CH2/4 REC CH2/4
3&4
L CH 2 CH 3 CH 4
AUDIO FULL/FINE
REC PLAY
REW FF SHIFT
PULL
STOP
INSERT
PUSH
DVCPRO
DV
2 X
OFF
REC
PB
UNITY
VAR
ON
OFF
INT
EXT
TAPE
EE
XL/L/M-cassette
SHTL
JOG
SLOW
R Q P