PictureTel LIVELAN 2 - Manual (Page 18)

To connect your LiveLAN 2.0 video camera to the LiveLAN Multimedia Accelerator board:
1. Connect the 8-pin end of the video adapter cable into the socket labeled on the LiveLAN Multimedia
Accelerator board. The following illustration shows the LiveLAN Media Accelerator board's connector
plate:
2. Connect one end of the existing video cable to the back of the camera, and the other end to the
receptacle end of the video adapter cable.
3. Connect one end of the existing power cable to the power receptacle on the camera. Connect the other
end of the power cable to an external power supply.
Connecting the Microphone
To connect your LiveLAN 2.0 microphone to the LiveLAN Multimedia Accelerator board:
1. Plug the microphone into the socket labeled on the LiveLAN Multimedia Accelerator board.
Connecting the Speakers
To connect your LiveLAN 2.0 speakers to the LiveLAN Multimedia Accelerator board:
1. Using your existing speaker cable, connect Speaker A to the audio output socket labeled on the
LiveLAN Multimedia Accelerator board.
2. Connect one end of the existing power cable to the power receptacle on Speaker A. Connect the other
end of the power cable to an external power supply. There should be no cables connected to the socket
labeled on the LiveLAN Media Accelerator Board (codec board).
[email protected]
Copyright © 1998, PictureTel Corporation. All rights reserved.