Figure 6, Figure 7 – ParaBody 778 User Manual
Page 9
Advertising
9
FIGURE 6
STEP 6
• Remove one existing 3-1/2” PULLEY, two
WASHERS, two 2” WHEELS and two SPACERS
from the ADJUSTMENT TUBE on the 100 LEG
PRESS OPTION by unfastening the 3/8 X 4-1/2”
BOLT holding the pulley on. See FIGURE 6.
(NOTE: The pulley will be used in STEP 9.)
3-1/2” PULLEY
2” WHEEL
3/8 X 4-1/2”
BOLT
SPACER
FIGURE 7
STEP 7
• Assemble the LEG PRESS CABLE (4) to the ADJUSTMENT TUBE on the 100 LEG PRESS using the existing previously
removed 3/8 X 4-1/2” BOLT, SPACERS, WASHERS, 2” WHEELS AND NUT. (Note: Do not overtighten! Tighten only until
nut is completely on bolt.) See FIGURE 7.
2” WHEEL
3/8 X 4-1/2” BOLT
NUT
WASHER
SPACER
4
DO NOT
OVERTIGHTEN!
Advertising