PYLE Audio PLTV7.5DIN - Manual (Page 31)

31
The headlight of
the vehicle is lit.
The display is made dark at night to
prevent the glare (When the headlight of
the vehicle is lit in the daytime, the display
gets dark).
The color of
the display is
light or a
shade of color
is not good .
The color is not
adjusted
adequately.
Check that Color and Tint are adjusted
properly.
The image
gets unclear.
Bad receiving
condition.
A radio wave may not reach sufficiently due
to obstruction of mountains or buildings.
Check it again at a place where a radio
wave can be received properly.
Screen has a
double or
triple image.
Bad receiving
condition
It may be under the influence of radio wave
reflected by mountains or buildings. Check
it again after changing place or direction.
Screen has
spots or
stripes in the
image.
Presence of
jamming
It may be under the influence from
automobiles, streetcar, power cable, neon
sign, and so forth. Check it again after
changing place.
TV
There are red,
green, and
blue points in
the display.
This is not a failure, but a phenomenon
peculiar to a liquid crystal panel (The LCD
panel is produced according to technology
with very high precision.
Note that, though
there are effective pixels of 99.99% or
more, pixel missing or normally lit pixels
account for 0.01%)