Panasonic PT-47WX49 - Manual (Page 17)

16
R OLLER G UIDE F EATURE C HART
Roller Guide Feature Chart
M ENU D ESCRIPTION
SET UP
LANGUAGES r Select English, Spanish, or French menu.
PROG. CHAN
(Program Channels)
r
MODE - Select Cable or TV. See Installation
section in manual.
r
ANTENNA - Select ANT 1 or ANT 2.
r
AUTO PROGRAM - Automatically program
channels having a signal into memory.
r
MANUAL PROGRAM - Manually add or delete
channels from memory.
(Closed Captioning)
r CC ON MUTE - Activate C1-C4 for Closed
Captioning display when the remote MUTE button
is pressed.
r CC MODE - Select T1-T4 or C1-C4 for Closed
Captioning, program guides and other information.
OTHER ADJ.
r AUTO POWER ON - Select SET to power up the
TV at the same time as the Cable Box or other
components or select OFF.
r CONVERGENCE 1 - Adjustment may be required
when the PTV is moved because of the effects of
the Earth’s magnetic field on the projection tubes.
r CONVERGENCE 2 - Adjustment may be required
after setting Convergence 1.
AUDIO
AUDIO ADJ.
(Adjustments)
r MODE - Select STEREO, SAP (Second Audio
Program) or MONO. (Use MONO when stereo
signal is weak.)
Note: STEREO, SAP or MONO can also be
selected by pressing the SAP button on the
Remote Control.
r BASS - Increase or decrease the bass response.
r TREBLE - Increase or decrease the treble
response.
r BALANCE - Emphasize the left/right speaker
volume.
r NORMAL - Reset BASS, TREBLE and BALANCE
to factory default.
CC