Philips HTS3156 - Manual (Page 14)

14
English
SPEAKERS
AM/
MW
Step 2: Connecting to TV
This connection enables you to view the
video playback from this unit. You only
need to choose one of the options
below to make the video connection.
– For a standard TV, follow option 1.
– For a progressive scan TV, follow
option 2.
Helpful Hints:
– It is important to connect this unit directly
to the TV in order to enjoy optimum video
quality.
– To hear the TV audio through this unit,
connect the AUDIO IN sockets on the unit to
the audio output sockets on your TV (audio
cables not supplied). Press TV on the remote
control when watching the TV programs.
Option 1: Connecting to the Video
socket
Use a composite video cable (yellow -
supplied) to connect the CVBS socket
on the main unit to the video input
socket (or labeled as A/V In, Video In,
Composite or Baseband) on the TV.
It provides good picture quality..
Option 2: Connecting to a
Progressive Scan TV or component
video input
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
A Use the component video cables (red/
blue/green - not supplied) to connect the
Y Pb Pr sockets on the main unit to the
corresponding component video input
sockets (or labeled as Y Pb/Cb Pr/Cr or
YUV) on the TV.
It provides better picture quality.
B If your TV accepts progressive signals,
proceed to chapter ‘Getting Started -
Setting up Progressive Scan feature’ for
detailed progressive feature setup.
Basic Connections
(continued)
Option 1
Option 2
Main Unit (rear)
1_hts3156_93_eng2_final815.indd 14 1_hts3156_93_eng2_final815.indd 14 2008-04-11 10:51:14 AM 2008-04-11 10:51:14 AM