Philips HTS3156 - Manual (Page 18)

18
English
Finding the correct viewing
channel
A Press SOURCE button on the main unit
until ‘DISC’ appears on the display panel
(or DISC/USB on the remote control).
B Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
You may press ° button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
Refer to your TVs user manual on
how to select the correct input on your
TV.
Getting Started
Switching to different play
source
On the main unit
Press the SOURCE button on the front
panel repeatedly to select:
DISC ¤ FM ¤ AM/MW ¤ TV ¤ AUX
¤ MP3 LINE-IN ¤ DISC ....
Or
On the remote control
ZOOM
Press DISC/USB repeatedly to hear the
audio output from the external device.
Press ‘DISC’ to switch to DISC mode.
Press ‘USB’ to switch to USB mode
Press RADIO to switch to FM or AM/
MW band.
Press TV to hear the TV sound output
through this unit if the audio input on this
unit is connected to your TV.
Press AUX/DI for device connected to
the AUDIO IN-AUX sockets.
Press MP3 LINE-IN for device
connected to the MP3 LINE-IN sockets.
1_hts3156_93_eng2_final815.indd 18 1_hts3156_93_eng2_final815.indd 18 2008-04-11 10:51:15 AM 2008-04-11 10:51:15 AM