Panasonic EY6813 - Manual (Page 8)

- 8 -
Support handle
Place the support handle at your
favorite position and tighten the han-
dle securely.
Loosen Tighten
Depth gauge
Loosen the support handle and adjust
the depth gauge at your favorite
depth.
After adjusting, tighten the support
handle and fix depth gauge.
Depth gauge
Depth of drilling
Battery pack
For Appropriate use of Ni-MH
Battery Pack EY9210
Charge the Ni-MH battery fully
before storage in order to ensure a
longer service life.
The ambient temperature range
is between 0°C (32°F) and 40°C
(104°F).
If the battery pack is used when the
battery temperature is below 0°C
(32°F), the tool may fail to function
properly. In that case, charge the
battery until charging is completed
for appropriate functioning of the
battery.
Battery pack life
The rechargeable batteries have a
limited life. If operation time becomes
extremely short after recharging, replace
the battery pack with a new one.
Note: Use under extremely hot or
cold conditions will reduce
operating capacity per
charge.
Release lever
Battery pack Installation and
Removal
-For removal-
Pull the release lever to free the bat-
tery holder.
Battery holder
Release
lever
-For installation-
Fit the battery holder unit it clicks in
position.
Battery charger (EY0214)
Note: Charge a new battery pack,
or a battery pack that has not
been used for a prolonged
time, for about 24 hours to
bring the battery up to full
charge.
1. Plug the charger into an AC outlet.
2. Insert the battery pack firmly into
the charger.
To AC
outlet
Battery
pack
Battery
charger