Panasonic SC-ZT2 - Manual (Page 7)

VQT2R70
7
Remote control
Standby/ON button (➜ page 16)
Input mode and remote control code
buttons (➜ pages 16, 24)
For adjusting speaker output
(
➜ pages 20, 21)
Test signal output (➜ pages 14, 21)
For adjusting the volume (➜ page 16)
For using “WHISPER-MODE SURROUND”
(➜ page 20)
Muting (➜ page 20)
For returning to the previous menu
(➜ pages 10, 15, 21 to 24)
For using “GAME” (➜ page 20)
For entering setup mode
(➜ pages 10, 15, 21 to 24)
For adjusting/activating settings
(➜ pages 10, 15, 21 to 24)
For selecting or canceling
Dolby Virtual Speaker,
Dolby Pro Logic and SFC mode
(➜ page 17)
Remote control preparation
Inserting the batteries
(R6/LR6, AA)
Press on the tab to open.
Insert so the poles (( and )) match those in the
remote control.
Use manganese batteries or alkaline batteries.
• Do not mix old and new batteries.
• Do not use different types of batteries at the same time.
• Do not take apart or short circuit.
• Do not attempt to recharge alkaline or manganese batteries.
• Do not use batteries if the covering has been peeled off.
• Do not heat or expose to fl ame.
• Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows
closed.
Mishandling of batteries can cause electrolyte leakage which
can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store them in a cool, dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Control guide/Remote control preparation
Before use
Note
For remote control buttons used for speaker
setting, see pages 13 to 15.
Remote control signal sensor Main unit
Using the remote control
• Do not place an object between the signal sensor and
the remote control.
• Do not expose the signal sensor to direct sunlight or
strong light of a fl uorescent lamp.
• Keep the transmission window and the system’s sensor
free from dust.
Within 7 meters
(23 feet) at the front
(The remote controlling
range varies according
to the angle)
Transmission
window
Note
Approx.
30º
Approx.
30º
5%<622
8364 'PKPFF 5%<622
8364 'PKPFF ඦ೨   ඦ೨