Panasonic AG-AC160AEN - Manual (Page 62)

62
2) Select [YES] on the confirmation screen
to attach an index.
• The point in the clip at which the index
will actually be attached will be accurate
to within an error of 0.5 seconds.
• To delete the index, select
[INDEX][YES] in step
3 before
performing the following.
1) Select the clip to play, tilt the
OPERATION lever in the < >
direction, and pause the clip.
2) Since tilting the OPERATION lever
in the < >< > directions moves the
pointer between the points where
indexes are attached, move the
pointer to the index to be deleted, and
push the OPERATION lever.
3) Select [YES] on the confirmation
screen.
[NO]:
Returns to the previous screen.
• It is not possible to add indexes to clips shot
using a consumer camcorder model.
• It is not possible to adjust the volume during
index playback.
[CLIP PROTECT] (only in AVCHD mode):
[YES]:
Protects selected clips. ([ ] mark will be
displayed.)
• Cancels protection when the protected
clip is selected. ([
] mark will
disappear.)
Formatting the memory card will delete all
clips even if they are protected.
[NO]:
Returns to the previous screen.
4
Press the <MENU> button to return to the
thumbnail screen.
Repairing clips (only in DV mode)
Repair clips on which the defective clip indicator
[
X ] (Yellow) is displayed on the thumbnail screen.
• Clips with the defective clip indicator [
X
] (Red)
cannot be repaired.
1
Press the <MENU> button on the thumbnail
screen.
The thumbnail menu will be displayed.
2
Select [REPAIR] in the [OPERATION] item on
the thumbnail menu and press [YES].
3
Select a clip to repair using the OPERATION
lever.
4
Press the <EXEC> button.
5
Select [YES] on the confirmation screen,
and push the OPERATION lever.
Clip repair will be performed.
• When shot mark has been set on the clip, the
setting is canceled.
• Repair defective clips with this camera before
moving them to a computer. Defective clips
cannot be repaired once they are moved to
a computer and written back on the memory
card.