Panasonic AG-AC160AEN User Manual
Page 98
98
Item
Display
mode
Description of settings
[DV CMD SEL] <CAMERA>
(DV mode
only)
Sets the recording operation to be performed by the backup device when you
press the <START/STOP> button.
[REC P]:
Pauses and unpauses the recording.
[STOP]:
Starts and stops the recording.
[TALLY LAMP] <CAMERA> Sets lighting of the tally lamp.
[FRONT]: The front tally lamp (microphone side) lights.
[REAR]:
The rear tally lamp (viewfinder side) lights.
[BOTH]:
Both tally lamps light.
[OFF]:
No tally lamp lights.
[CLOCK SET] <CAMERA>
<PB>
Sets the built-in calendar of the camera.
[TIME ZONE]
<CAMERA>
<PB>
Adds to or deducts from GMT the time value of [-12:00] to [+13:00] in 30-minute
steps. (Refer to the following table.)
[0:00]
Time
difference
Region
Time
difference
Region
+00:00
Greenwich
–00:30
–01:00
Azores
–01:30
–02:00
Mid-Atlantic
–02:30
–03:00
Buenos Aires
–03:30
Newfoundland Island
–04:00
Halifax
–04:30
–05:00
New York
–05:30
–06:00
Chicago
–06:30
–07:00
Denver
–07:30
–08:00
Los Angeles
–08:30
–09:00
Alaska
–09:30
Marquesas Islands
–10:00
Hawaii
–10:30
–11:00
Midway Islands
–11:30
–12:00
Kwajalein Atoll
+12:30
+13:00
+11:30
Norfolk Island
+12:00
New Zealand
+10:30
Lord Howe Island
+11:00
Solomon Islands
+09:30
Darwin Islands
+10:00
Guam
+08:30
+09:00
Tokyo
+07:30
+08:00
Beijing
+06:30
Yangong
+07:00
Bangkok
+05:30
Mumbai
+06:00
Dacca
+04:30
Kabul
+05:00
Islamabad
+03:30
Tehran
+04:00
Abu Dhabi
+02:30
+03:00
Moscow
+01:30
+02:00
Eastern Europe
+00:30
+01:00
Central Europe
[LANGUAGE]
<CAMERA>
<PB>
Sets the Menu language.
[English], [Español], [Français] (AG-AC160AP)
[English], [Español], [Français], [Deutsch], [Italiano] (AG-AC160AEJ)
[English], [Español], [Русский] (AG-AC160AEN)
[SYSTEM
FREQ]
<CAMERA> Sets the system frequency. (The factory setting values may vary depending on
the region.)
[59.94Hz]: NTSC region
[50Hz]: PAL region
•
If the [TURN POWER OFF] message is displayed, switch the camera OFF and
then ON again. Every time the power is turned on, the system frequency changes.
[SYSTEM
INFO]
<CAMERA>
<PB>
Displays the version of the system in this camera.
is the factory default mode.