Uploading metadata [meta data, Selecting the [user clip name] recording method, Recording method – Panasonic AG-AC160AEN User Manual

Page 49

Advertising
background image

49

Shooting

Uploading metadata [META DATA]

You can perform the following operations.
If necessary make preparations.

•

Loading metadata
Insert the memory card on which the metadata
is recorded into the camera. (For details on clip
metadata, see page 48.)

•

Selecting whether to record the metadata on the
memory card

•

Initializing the metadata inside the camera

•

Displaying the metadata inside the camera

1

Turn the POWER/MODE switch to go into

<CAMERA> mode.

2

Press the <MENU> button.

Menu operation (Page 31 of Vol.1)

3

Tilt the OPERATION lever in the < >< >

directions to select [META DATA], and push the

OPERATION lever (or tilt in the < > direction).

4

Tilt the OPERATION lever in the < >< >

directions to select items, and push the

OPERATION lever.

[CARD READ]:

Loads the metadata set on the memory card on
to the camera.
Move to [CARD READ], push the OPERATION
lever, select either [SLOT1]/[SLOT2]/[NO], and
push the OPERATION lever.

•

Up to eight items of metadata on the memory
card can be displayed, starting from the most
recent creation date.

•

If characters other than single-byte
alphanumeric characters are used in the
metadata file to be loaded they are displayed
as “*”.

[RECORD]:

Sets whether to record the metadata loaded on
the camera simultaneously on a memory card
when recording.
Select either [ON]/[OFF] (format/do not format),
and push the OPERATION lever.
The factory setting for this mode is [OFF].

[USER CLIP NAME]:

The [USER CLIP NAME] recording method is
selectable. For details, see the next column.

[META DATA PROP]:

Displays the metadata recorded in the camera.

[CLIP COUNTER RST]:

Resets the counter value to 1.
Select either [YES]/[NO] (reset/do not reset),
and push the OPERATION lever.

[META INIT SET]:

Initializes the metadata recorded in the camera.
Select either [YES]/[NO] (initialize/do not
initialize), and push the OPERATION lever.

5

Press the <MENU> button to release menu

mode.

Selecting the [USER CLIP NAME]

recording method

Press the <MENU> button and select [META
DATA][USER CLIP NAME] to select the [USER
CLIP NAME] recording method. Two options are
available: [TYPE1] and [TYPE2].

[USER CLIP NAME] to be recorded

[TYPE1]

[TYPE2]

When clip metadata

has been loaded

Uploaded data

Uploaded data

+

COUNT

value*

When no clip

metadata has been

loaded, or when

recording of loaded

clip metadata has

been disabled

Sequential

5-digit number

in the order of

shooting

Sequential

5-digit number

in order of

shooting

Advertising
This manual is related to the following products: