Setting user information – Panasonic AG-AC160AEN User Manual

Page 53

Advertising
background image

53

Shooting

Setting user information

Setting user information allows you to store 8-digit
memo information in the hexadecimal format. User
information is automatically saved in the memory
and retained after you turn off the power.
In DV mode, [USER]/[TIME]/[DATE]/[TCG]/[FRAME
RATE] can be selected with the [UB MODE] item
on the setup menu [TC/UB SETUP] screen. Select
[USER] to set user information in DV mode.

1

Turn the POWER/MODE switch of the

camera <ON>. (Page 30 of Vol.1)

2

Select the [UB PRESET] item on the setup

menu [TC/UB SETUP] screen.

•

Menu operation (Page 31 of Vol.1)

•

Operations can be performed with buttons on
the remote control that correspond to those on
the camera. For details, see “Remote control”
(Page 24 of Vol.1).

3

Tilt the OPERATION lever in the < >

direction to move to [YES], and push the

OPERATION lever.

4

Set the user information.

Tilt the OPERATION lever in the < >< >
directions to select user information characters.

•

You can set numbers from 0 to 9 and letters
from A to F for the user information.

Tilt the OPERATION lever in the < > direction
to move to the next digit, and tilt in the < >< >
directions again to select the character.

• You can reset the user information to zero by

pressing the <RESET/TC SET> button while
setting the user information.

Camera

5

When finished setting the user information,

push the OPERATION lever.

6

Tilt the OPERATION lever in the < >

direction to move to [YES], and push the

OPERATION lever.

Advertising
This manual is related to the following products: