Petsafe PIF-275-19 - Manual (Page 11)

www.petsafe.net 11
To Set the Static Correction Level
Read all steps before attempting to set the Static
Correction Level.
1. Remove the clear plastic cover with the edge
of the Test Light Tool to expose the Correction
Level Button (D).
2. With the battery installed, press the Correction
Level Button and release when the Receiver LED
Indicator Light lights up (E).
3. The Receiver LED Indicator Light will emit
a series of flashes representing the Static
Correction Level.
4. Increase the Static Correction Level by pressing
and releasing the Correction Level Button within
5 seconds of the previous series of flashes.
5. After setting the Static Correction Level, replace
the cover to protect the Correction Level
Button. The Static Correction levels increase in
strength from 1 to 6. Pushing the Correction
Level Button while the Receiver Collar is on
D
E