Petsafe PIF-275-19 - Manual (Page 21)

www.petsafe.net 21
Make sure the Receiver Collar battery is
properly installed, the Static Correction level is
set at 2 or greater, and the Test Light Contacts
are touching the Contact Points (I).
Test Light Instructions
1. Make sure the Receiver Collar battery is
properly installed. Set the Correction Level
to 2 or above.
I
2. Hold the Test Light Contacts to
the Contact Points (I).
3. Walk toward the Boundary
Zone holding the Receiver
collar at your pet’s neck level (J)
until the Test Light flashes (K).
Save Test Light for future testing.
J
Bou
ndar
y Zone
Pet
Area
K
Note: If the Test Light does not flash, install a new battery and re-test.
If Test Light still does not flash, contact the Customer Care Center at
1-800-732-2677.