Pioneer DRM-600 User Manual

Page 3

Advertising
background image

2.

Check Hardware

Verify the Integrity of the SCSI Chain:

1.

Power down the computer and CD-ROM drive.

2.

Verify the CD-ROM drive has been assigned it's own unique SCSI ID.

3.

Check that the SCSI cables are securely attached.

4.

Make sure the last device on the SCSI chain is terminated.

5.

If the CD-ROM drive is in the middle of the chain it must be un-terminated.

6.

Run a self test on the unit the unit to make sure it is functioning properly.

7.

Refer to bulletin on running self test.

8.

Verify that the CD-ROM discs are properly loaded into the drive.

9.

Make sure the discs are loaded shiny side up in the DRM-624X/604X/602X.

10.

Disc should be loaded shiny side down in the DR-U124X.

For the name of the closest Authorized Pioneer Service Center, contact Pioneer Electronic Service:

800-872-4159

Advertising