Philips HDR3700 - Manual (Page 78)

78 EN
Refer to the explanations below and set the
selected item.
A : Skip (Default: 15 seconds)
Sets the amount of skip time for [SKIP].
B : Replay (Default: 15 seconds)
Sets the amount of rewind time for [REPLAY].
Set “TV System”.
Select a setting using [
U \ D], then
press [OK].
Your setting will be activated.
Note
• With discs recorded using the PAL system, a PAL
signal is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be
viewed on an NTSC system TV.
• With discs recorded using the NTSC system, an
NTSC signal is output for viewing on an NTSC or
Multi system TV.
• With discs recorded using the NTSC system, select
PAL to view on a PAL system TV.
Display
1
In stop mode, press [HOME]. Select
“General Settings” using [
U \ D],
then press [OK].
2
Select “Display” using [ U \ D], then
press [OK].
3
Select the desired item using
[
U \ D], then press [OK].
4
Refer to pages 78 - 79 and set the
selected item.
5
When you finish with the setting,
press [HOME] to exit.
Set the screen saver time delay.
Select a setting using [ U \ D], then
press [OK].
Your setting is activated.
9 TV System (Default: PAL) (DVD only)
PAL: Outputs a modified PAL signal for viewing
discs recorded with the NTSC system on a
PAL system TV.
Auto: Changes the video system (PAL / NTSC)
automatically according to the format of
the inserted disc.
General Settings
Skip
Replay
Skip/Replay Interval
5 seconds
15 seconds
30 seconds
Skip
1 minute
5 minutes
General Settings
Skip
Replay
Skip/Replay Interval
5 seconds
15 seconds
30 seconds
Replay
1 minute
5 minutes
General Settings
Skip/Replay Interval
TV System
Disc Playback
Auto
TV System
PAL
1 Screen Saver (Default: 10 minutes)
1
2
Front panel brightness
Screen Saver
Display
General Settings
Screen Saver
Front panel brightness
Display
5 minutes
Screen Saver
OFF
10 minutes
15 minutes
30 minutes
E2N41BN_EN.book Page 78 Wednesday, July 2, 2008 4:36 PM