Plantronics Voyager 510 - Manual (Page 4)

Before using your headset for the first time, you must pair it with your Bluetooth phone or
device. Be sure the headset is fully charged. For set up and pairing instructions with Bluetooth
devices other than mobile phones, please consult your Bluetooth device user guide.
Turn on both devices.
6 7
POWERING PAIRING
Powering Headset
Powering USB Bluetooth Adapter
Pairing Headset with Bluetooth Phone
The USB Bluetooth adapter is automatically powered on upon inserting into the USB port
of the computer. If your USB port on the computer is hard to access, you can use the USB
extension cable.
NOTE: The USB Bluetooth adapter is automatically active with the current paired headset upon
powering on.
Press and hold the power/mute button
for three seconds to turn the headset
on or off.
The indicator light flashes blue when the
headset is on.
The indicator light will flash red when
the battery becomes low.
1. Simultaneously press the listen volume
adjust button marked + (volume up)
and the call control button. Release the
buttons when the indicator light begins
to flash red then blue.
2. While the headset is flashing red and
blue, use the phone menu to search
for Bluetooth devices and select “510
Plantronics”.
3. When prompted for passkey enter
0000. The headset will flash blue when
paired successfully.