Philips US-24ST2200/27 User Manual
Page 7
INCREDIBLE STEREO (NO / YES)
When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is MONO, a
signal processing technique is applied for the purpose of simulating a “stereo-like” effect.
Note: When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is
STEREO (regardless of whether there is a stereo signal on the current channel) the
resultant effect will be imperceptible, minimal or possibly degraded, depending upon
various factors.
ULTRA BASS (NO / YES)
When ULTRA BASS is set to YES, the audio frequency equalization is modified such that
the bass frequencies are significantly emphasized.
VOLUME BAR (NO / YES)
When VOLUME BAR is set to YES, an OSD graphic appears that provides visual
verification ( e.g. “||||||----- 15”) during volume adjustment, by means of either the remote
control, or the front panel.
AUDIO/VIDEO OUT MUTE (NO / YES)
When set to YES, turns off the audio and video MONITOR OUT signals (either
demodulated RF input or loop-through video).
REMINDER (NO / YES)
When REMINDER = YES, the reminder feature provides a constant on-screen indication
of the current channel or input, (e.g., TV 2, CVI, etc.), that channel’s or input’s label (if a
label has been assigned in CHANNEL INSTALL), and the current MUTE status (i.e., if
sound MUTE is active). The REMINDER on-screen indication appears near the top of TV
screen viewing area. When REMINDER = NO, the reminder information appears only
when the channel or input is changed, then disappears after approximately ten seconds
.
7