Philips PET7402S - Manual

1 Attach the main unit and the second screen to
the back of the front seat headrests.
2 Connect the supplied AV cable to the AV
OUT jack on the main unit and the AV IN
jack on the second screen.
3 Connect the supplied car adaptor cable to the
DC IN jacks on the main unit and the second
screen, and to the car cigarette lighter socket.
Prepare (for in-car use) 1
Quick start guide
Philips Portable DVD Player PET7402/PET7402S
1 Slide the ON/OFF switch to ON to switch on
the main unit.
2 Slide OPEN 2 on the main unit.
3 Remove the protective card (if any) and load a
disc with the label side facing up.
4 Close the disc compartment.
➜ Playback will start automatically. If not, press
2;/OK.
5 To stop playback, press 9.
2 Enjoy
Note:
During play, you can:
– Press OPTION to select some play options: audio,
subtitle, repeat, and time display.
– Press BRIGHTNESS on the main unit or rotate
BRIGHTNESS -/+ on the second screen to
adjust brightness of screen to match lighting
conditions.
1 Prepare (for domestic
use)
Connect additional equipment (TV for
example)
1 Connect the AV OUT socket on the main unit
to the video and audio sockets on a TV as
shown directly.
2 Connect the AC adaptor cable to the DC IN
Jack on the main unit and the power outlet.
3 Switch on the TV and set to the correct video-
in channel.
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a
RF modulator. Please consult your dealer.)
Printed in China PET7402(S)_QSG_V2.0
TV
Main unit
Red
Yellow
Not supplied
Second screen
AV cable
Car adaptor
cable
Cigarette
lighter
White
PET7402-Eng_QSG.qxd 9/8/09 16:31 Page 1