Pioneer PureVision PDP-507XG - Manual (Page 22)

Watching TV 06
22
En
1 Press c c c c to select the display mode.
Each time you press c c c c, the display mode is switched between
2-Screen, Picture in Picture, and Single-Screen modes.
• In 2-Screen or Picture in Picture mode, press to switch the
position of the two screens shown.
• The left screen (in the 2-Screen mode) or the larger screen (in
the Picture in Picture mode) is the active screen, indicated by
a "
z z z z" icon. You can use any of the normal functions to change
the picture and sound.
• In 2-Screen mode, press f f f f to change the size of the left
screen.
• In Picture in Picture mode, press to move the position of
the small screen anti-clockwise.
2 To select the desired input source, press the appropriate
input source button.
• If watching TV programs, press P+ / P– to change the channel.
Note
• The multiscreen function cannot display images from the
same input source at the same time. If you make such an
attempt, a warning message appears.
• The multiscreen function cannot display images from
combinations of two external input sources (inputs 1 to 5, PC).
It can display images from the following combinations of
inputs sources: built-in TV tuner and one external source
(inputs 1 to 5, PC).
• When you press HOME MENU, the single-screen mode is
restored and the corresponding menu is displayed.
• When in the 2-Screen mode, images displayed on the right
screen may look less fine, depending on images.
• If you select 1920 x 1080p@24 Hz for the main screen in the
Picture in Picture or 2-Screen mode, video images may not be
displayed properly because of the system's capability.
• With headphones connected, you can listen to audio coming
from the sub screen when in the 2-Screen or Picture in Picture
mode. For more information, see
Listening to audio from the
sub screen using headphones on page 33.
Freezing images
Use the following procedure to capture and freeze one frame from
a moving image that you are watching.
Important
• Displaying a static image for a long period of time, or for
shorter periods of time everyday, may result in image retention.
• Press d d d d.
A still image appears on the right screen while a moving image is
shown on the left screen.
• Press d d d d again to cancel the function.
Note
• You cannot freeze the picture when using the 2-Screen or
Picture in Picture mode.
• When this function is not available, a warning message
appears.
Normal image Still image