Pioneer PureVision PDP-507XG - Manual (Page 44)

Using with other equipment 10
44
En
Activating the INPUT 3 HDMI terminal
1 Press HOME MENU.
2 Select “Option“ ( / then ENTER).
3 Select “HDMI Input“ ( / then ENTER).
4 Select “Setting“ ( / then ENTER).
5 Select “Enable“ ( / then ENTER).
6 Press HOME MENU to exit the menu.
Note
• You need not manually activate the INPUT 4 HDMI terminal.
To specify the type of digital video signals:
1 Repeat steps 1 to 3 provided for “Activating the INPUT 3
HDMI terminal“.
2 Select “Video“ ( / then ENTER).
3 Select the type of digital video signals ( / then ENTER).
• If you select “Auto", an attempt will be made to identify the type
of digital video signals when digital video signals are received.
4 Press HOME MENU to exit the menu.
Note
• If you select a parameter other than "Auto", make such a setting
that results in natural color.
• If no image appears, or images appear in inappropriate colors,
specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
When using the INPUT 3 HDMI terminal, you need to specify the
type of audio signals.
1 Repeat steps 1 to 3 provided for “Activating the INPUT 3
HDMI terminal“.
2 Select “Audio“ ( / then ENTER).
3 Select the type of audio signals ( / then ENTER).
• If you select "Auto", an attempt will be made to identify the type
of audio signals when audio signals are received.
4 Press HOME MENU to exit the menu.
Note
• The INPUT 4 HDMI terminal accepts only digital audio signals.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
Using control cords
Connect control cords between the plasma display and other
Pioneer equipment having the
t t t t logo to be able to operate the
connected equipment via the remote control sensor on the plasma
display.
After the CONTROL IN terminals have been connected, the remote
control sensors on the connected equipment do not accept
commands from the remote control units. Face the remote control
units to the remote control sensor on the plasma display when
operating the connected equipment.
Item Description
Disable (default) Deactivates the INPUT 3 HDMI terminal.
Enable Activates the INPUT 3 HDMI terminal.
Item Description
Auto (default) Automatically identifies input digital video signals.
Color-1 Digital Component Video signals (4:2:2) locked
Color-2 Digital Component Video signals (4:4:4) locked
Color-3 Digital RGB signals locked
Item Description
Auto (default) Automatically identifies the input signals.
Digital Accepts digital audio signals.
analog Accepts analog audio signals.
CONTROL
IN
OUT
CONTROL
IN
OUT
CONTROL
IN
OUT
PDP-427XG (rear)
Mono mini jack cable