Help for base settings – Plantronics Wireless Headset System WO100 User Manual

Page 22

Advertising
background image

Plantronics Savi User Guide

22

Help for Base Settings

Auto Answer

Auto answer saves the user a button press to establish the radio link between headset and base unit.
When auto answer is set to OFF you must press the headset call control button or base PC/desk phone
talk button to answer an incoming call.*
When Auto Answer is set to ON an incoming call will be answered when the headset is removed from the
charge cradle.*

Off

Default Line

Default line sets user preference for outbound desk phone or PC, when headset call control button is
pressed.
When default line is set to desk phone and you press the headset call control button to initiate a call, the
desk phone will be taken off-hook. You then need to dial the phone number from the desk phone.*
When default line is set to PC and you press the headset call control button an audio link will be brought
up between your PC and headset. You then can place an outbound call via your soft phone application
or listen to streaming audio via a media player.

Desk
Phone

Over-the-Air
Subscription

Over-the-air subscription allows a headset to be subscribed to the base without physically docking the
headset. Required when conferencing various models of Plantronics Savi headsets.
When over-the-air subscription is set to ON you can subscribe a headset to your base without physically
docking the headset into the charge cradle.
When over-the-air subscription is set to OFF you can only subscribe a headset to the base by physically
docking the headset into the charge cradle.
For information on how to subscribe a master headset to the base see

Subscribing a Master Headset

on page 15.
For information on how to temporarily subscribe guest headsets to the base for a conference call, see

Conferencing in Up to Three Additional Headsets

on page 15.

On

Range**

Range can be minimized to help with desk phone/PC buzzing, improve user density, or restrict range
of users.
When Range is set to HIGH a user will have up to 350

feet of range.

When Range is set to MEDIUM a user will have up to 150

feet of range.

When Range is set to LOW a user will have up to 50

feet of range.

High

Audio
Bandwidth**

The system will support both narrowband and wideband audio from the desk phone and PC.
Wideband audio delivers heightened speech clarity and life-like fidelity. However, wideband audio
consumes more battery power and has more stringent access criteria which reduces the number of
systems that can be deployed in a small area.
Your desk phone must support wideband audio to experience the benefit of selecting “wideband” for that
device. All PCs support wideband audio.
When switching between narrowband and wideband audio, you must re-establish the audio link for the
changes to take effect

Narrowband
Desk Phone
and PC

*Assumes use of lifter or EHS cable with desk phone and/or use of a softphone that is supported by PerSono Suite software.

** When bringing up a link from the base, the talk button will be solid yellow until a link is established. This could take up to several seconds
especially for wideband audio and/or when in moderate to high density environments. If you press the talk button when the indicator light is
yellow, it will terminate the search for an audio link.

Default
Settings

Advertising