Pentair IntelliComm - Manual (Page 40)

34
IntelliFlo Installation and User’s Guide
Running Backwash mode
To start Backwash mode:
1. Press the Backwash button.
2. When running in Backwash mode IntelliFlo will run at the preset backwash flow for the preset
backwash time.
3. When the Backwash mode is stopped, manually or after the preset Backwash cycle time, the
IntelliFlo will stop and show the “Rinse” menu option.
4. Press the Start Stop button after repositioning the backwash valve to rinse the filter.
5. When running in Rinse mode, the IntelliFlo will run at the preset backwash flow for the preset rinse time.
6. Once the pump has run in both Backwash and Rinse modes, the filter status will be recalculated in
filter mode.
7. After completing Backwash and Rinse, the backwash valve should be placed into the filter position,
unless other service is required.
Backwash menu screens
Backwash Flow Backwash Duration Rinse Duration
Filter Vacuum Back
Wash
Manual
Enter
Select
Start
Stop Reset Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo ®
Backwash Backwash 8:01 8:01
Backwash Flow Backwash Flow
60.GPM 60.GPM
Filter Vacuum Back
Wash
Manual
Enter
Select
Start
Stop Reset Feature
2
Feature
1
Men
u
Es
cape
On
Warn.
Alarm
IntelliFlo ®
Backwash Backwash 8:01 8:01
Backwash Duration Backwash Duration
0:05 0:05
Filter Vacuum Back
Wash
Manual
Enter
Selec
t
Start
Stop Reset Feature
2
Feature
1
Men
u
Es
cape
On
Warn.
Alarm
IntelliFlo ®
Backwash Backwash 8:02 8:02
Rinse Duration Rinse Duration
0:01 0:01