Plugging in the receiver, Connecting your equipment 03 – Pioneer VSX-1018AH-K User Manual

Page 24

Advertising
background image

Connecting your equipment

03

24

En

Plugging in the receiver

Only plug in after you have connected all your
components to this receiver, including the speakers.

Caution

• Handle the power cord by the plug part. Do not pull

out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place
the unit, a piece of furniture, or other object on the
power cord or pinch the cord in any other way. Never
make a knot in the cord or tie it with other cables. The
power cords should be routed so that they are not
likely to be stepped on. A damaged power cord can
cause a fire or give you an electric shock. Check the
power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent
service company for a replacement.

• The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular
use, e.g., when on vacation.

• Make sure the blue

STANDBY/ON light has gone

out before unplugging.

Plug the power cord into a power outlet.

VSX-1018AH_KU.book Page 24 Monday, March 10, 2008 4:51 PM

Advertising