The system setup menu 07, Checking mcacc preset data, Renaming mcacc presets – Pioneer VSX-1018AH-K User Manual

Page 47: Copying mcacc preset data, Clearing mcacc presets

Advertising
background image

The System Setup menu

07

47

En

Checking MCACC preset data

After you have completed

Automatically setting up for

surround sound (Auto MCACC) on page 10 or Automatic
MCACC (Expert)
on page 38, you can check your
calibrated settings using the on-screen display.

1

Select ‘MCACC Data Check’ from the Data

Management setup menu.

2

Select the setting you want to check.

• It is useful to do this while a source is playing so you

can compare the different settings.

3

Select the MCACC preset that you want to check.

Use

/ if necessary to switch speakers/settings.

4

Press RETURN to go back to the Data Check menu,

repeating steps 2 and 3 to check other settings.

5

When you’re finished, press RETURN.

You will return to the Data Management setup menu.

Renaming MCACC presets

If you have several different MCACC presets that you’re
using, you may want to rename them for easier
identification.

1

Select ‘Memory Rename’ from the Data

Management setup menu.

2

Select the MCACC preset you want to rename, then

select an appropriate preset name.
Use

/ to select the preset, then / to select a

preset name.

3

Repeat for as many MCACC presets as necessary,

then press RETURN when you’re finished.
You will return to the Data Management setup menu.

Copying MCACC preset data

If you want to manually adjust the Acoustic Calibration
EQ (see

Manual MCACC setup on page 41), we

recommend copying your current settings

1

to an unused

MCACC preset. Instead of just a flat EQ curve, this will
give you a reference point from which to start.

1

Select ‘MCACC Memory Copy’ from the Data

Management setup menu.

2

Select the setting you want to copy.

All Data – Copies all the settings of the selected
MCACC preset memory.

LEVEL & DISTANCE – Copies only the channel level
and speaker distance settings of the selected
MCACC preset memory.

3

Select the MCACC preset you’ll be copying the

settings ‘From’, then specify where you want to copy
them (‘To’).
Make sure you don’t overwrite an MCACC preset you’re
currently using (this can’t be undone).

4

Select ‘Copy’ to confirm and copy the settings.

Completed! shows in the OSD to confirm the MCACC
preset has been copied, then you automatically return to
the Data Management setup menu.

Clearing MCACC presets

If you are no longer using one of the MCACC presets
stored in memory, you can choose to clear the calibration
settings of that preset.

1

Select ‘MCACC Memory Clear’ from the Data

Management setup menu.

2

Select the MCACC preset you want to clear.

Make sure you don’t clear an MCACC preset you’re
currently using (this can’t be undone).

3

Select ‘Clear’ to confirm and clear the preset.

Completed! shows in the OSD to confirm the MCACC
preset has been cleared, then you automatically return to
the Data Management setup menu.

4.Data Management

:Return

a . MCACC Data Check

b . Memory Rename
c . MCACC Memory Copy
d . MCACC Memory Clear

4a.MCACC Data Check

:Return

1 . Speaker Setting

2 . Channel Level
3 . Speaker Distance
4

. Standing Wave

5 . Acoustic Cal EQ

ENTER:Next

4a5.EQ Data Check

63

125

250

500

1k

2k

4k

8k

16k

TRM

dB

MCACC

M1

63Hz

0.0

Ch [SBL]

125Hz

0.0

250Hz

0.0

500Hz

0.0

1kHz

0.0

2kHz

0.0

4kHz

0.0

8kHz

0.0

16kHz

0.0

:Return TRIM

0.0

4.Data Management

:Return

a . MCACC Data Check

b . Memory Rename

c . MCACC Memory Copy
d . MCACC Memory Clear

4b.Memory Rename

:Finish

MCACC Position Rename

M 1

M E M O RY 1

M 2 [ M E M O RY 2 ]

M 3 [ M E M O RY 3 ]

M 4 [ M E M O RY 4 ]

M 5 [ M E M O RY 5 ]

M 6 [ M E M O RY 6 ]

Note

1 The settings made in

Automatically setting up for surround sound (Auto MCACC) on page 10 or Automatic MCACC (Expert) on page 38.

4.Data Management

:Return

a . MCACC Data Check
b . Memory Rename

c . MCACC Memory Copy

d . MCACC Memory Clear

4c.MCACC Memory Copy

:Cancel

C o py

A l l D a t a

F ro m

[ M1. MEMORY 1

]

To

[ M2. MEMORY 2 ]

S t a r t C o py

[ C a n c e l

]

A l l D a t a

4.Data Management

:Return

a . MCACC Data Check
b . Memory Rename
c . MCACC Memory Copy

d . MCACC Memory Clear

4d.MCACC Memory Clear

:Cancel

C l e a r

M1. MEMORY 1

S t a r t C l e a r

[ C a n c e l

]

VSX-1018AH_KU.book Page 47 Monday, March 10, 2008 4:51 PM

Advertising