Pride Mobility Jazzy Select 14 - Manual (Page 26)

26 www.pridemobility.com Jazzy Select 14 Series
V . C O M F O R T A D J U S T M E N T S
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a wrench.
See figure 16.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the adjustment screw.
2. Turn the adjustment screw to raise the or lower the front
of the foot platform.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 17.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the back of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of adjust-
ment for the leg angle and a footrest adjustment range of
12-19 in. (30.48-48.26 cm). See figure 18.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the back of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Figure 17. Swing-Away Footrests
ADJUSTMENT
SCREWS
FOOTREST
EXTENSION
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 18. Elevating Leg Rests
RELEASE LEVER A
LEG REST
EXTENSION
Figure 16. Foot Platform Adjustment
FOOT PLATFORM BRACKET
ADJUSTMENT
SCREW