Inserting/removing the battery – Panasonic DMC-FZ3GN User Manual

Page 13

Advertising
background image

Preparation

13

Inserting/Removing the Battery

• Check that the camera is turned off and

that the lens is retracted.

• Close the flash.

1 Slide the card/battery door to

open it.

• Please be sure to use genuine

Panasonic batteries (CGA-S002E).

2 Insert:

Insert the charged battery until it
clicks.

Remove:
Slide the lock

1 to remove the

battery.

3 1 Close the card/battery door.

2 Slide the card/battery door to

the end and then close it firmly.

• If you will not be using the camera for a

long time, remove the battery.

• When fully charged battery has been

inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing may be shorter if
the battery is not charged sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again. (P20)

• Do not remove the card and the battery

while the card is being accessed. The
data on the card may be damaged.

• The supplied battery is designed only

for this camera. Do not use it with any
other equipment.

FZ3-GN.book 13 ページ 2004年7月27日 火曜日 午前9時25分

Advertising