Panasonic DMC-FZ3GN - Manual (Page 91)

Connecting to a PC or Printer
91
Connecting to a PC or Printer
Before Connecting with USB Connection Cable
[ : USB MODE]
Select the USB communication system according to the OS of your PC or your printer
before connecting them to the camera with the USB connection cable (supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P22)
1 Select [USB MODE]. 2 Select [PC] or [PictBridge (PTP)].
• When [PC] is selected, the camera is connected via USB Mass Storage communication
system.
• When [PictBridge (PTP)] is selected, the camera is connected via PTP (Picture Transfer
Protocol) communication system.
MENU
PC
SCENE MENU
LANGUAGE
VIDEO OUT
HIGHLIGHT OFF
NTSC
AUTO
ENG
EXIT MENU
USB MODE
SELECT
SETUP 3 /
3
USB MODE
SELECT SET
PictBridge
(PTP)
PC
Devices to be connected
Setting on the
USB mode
PC/OS
Windows ® 2000 Professional, Windows Me,
Windows 98/98 SE or Mac OS X (10.1 or above),
Mac OS 9.x
[PC]
Windows XP Home Edition, Windows XP
Professional or Mac OS X [PC] or [PictBridge
(PTP)]
Printer Printers supporting PictBridge [PictBridge (PTP)]
FZ3-GN.book 91 ページ ２００４年７月２７日 火曜日 午前９時２５分