Philips MMS 305/A 3.500 - Manual (Page 8)

8
English
French
German
Italian
Spanish
Dutch
Swedish
Finish
Polish
Chinese
Turkish
Russian
Norwegian
Danish
Installation
(Illustration page 3)
1. Connect the
LINE IN
cable (green color) from
OUT
1 at the soundcard to
INPUT
1
LINE
,
AND
2. Connect the
SURROUND IN
cable (black color)
from
OUT
2 at the soundcard to
INPUT
1
SURR
(only applicable if a 4-channel soundcard is
available),
AND
/
OR
3. Connect another
LINE IN
cable from another
stereo audio-visual source to
INPUT
2
STEREO
,
AND
/
OR
4. Connect another
LINE IN
cable from another
stereo audio-visual source to
INPUT
3
STEREO
5. Connect the front left satellite speaker to
SATELLITE FR
.
L
6. Connect the front right satellite speaker to
SATELLITE FR
.
R
7. Connect the surround left satellite speaker
to
SATELLITE SR
.
L
8. Connect the surround right satellite speaker
to
SATELLITE SR
.
R
9. Connect the Remote Control
IR
-
EYE
connector
to the
REMOTE IR
-
EYE
and place the eye on top
of your monitor/ desktop PC
10. Connect the fixed mains power cord to the
AC outlet
11. Switch on (and switch off as well) the system
using the
STANDBY
button on the remote
control
12. Tune the system using the controls on the
soundcard/ sound source and the controls
on the remote control
N
OTE
: Do not insert the power plug into the AC
outlet until all connections are made!
Safety
• Do not expose the speakers to excessive heat
(caused by heating equipment or direct
sunlight). To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture. If fluid spills into the speakers,
disconnect any connections immediately and
let the speakers dry before reusing them.
• You may clean the speakers with a soft, slightly
dampened lint-free cloth. Do not use any
cleaning agents as they may have a corrosive
effect.
• If the speakers do not operate, disconnect them
from the power supply. Wait a few seconds
before reconnecting them to the power supply.