Panasonic KX-FLM600 - Manual (Page 56)

56
Sending Faxes
To cancel the broadcast setting
1. Press
(STOP)
while the unit displays
“BROADCASTING”.
Display:
2. Press (START/SET/COPY) .
YES: PRESS SET
SEND CANCELED?
Using BROADCAST keys
The document will be scanned and stored into memory when using a BROADCAST key. After transmission,
the stored document will be erased automatically.
The memory capacity is approx. 120 pages based on the CCITT No. 1 Test Chart in standard resolution.
For the CCITT No. 1 test chart, see page 129.
FACE DOWN
(START/SET/COPY)
(STOP) (BROADCAST)
Broadcast report
After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a broadcast report:
1 Insert the document FACE DOWN.
2 Press the preset
(BROADCAST)
key.
≥ The document will be fed into the unit and
scanned into memory. The unit will then transmit
the data to each station, calling each number
sequentially.
Note:
≥ While scanning, do not move the pages which have
already ejected. A paper jam may occur. Allow the
scanning process to finish before viewing documents.
≥ If you select the fine, super fine or half tone resolution,
the number of pages that the unit can transmit will
decrease.
≥ If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all other stations have been
called.
NO.
01
02
03
04 Mike
Peter
Sam
Kim
USAGE TIME
01'10
01'08
01'09
01'10
004'37
PAGES (IQ-FAX)
02
02
02
02
008
OK
OK
OK
OK
START TIME
Jan. 10 1999 03:36PM
Jan. 10 03:31PM
Jan. 10 03:33PM
Jan. 10 03:34PM
Jan. 10 03:35PM
TOTAL
RESULT OTHER FACSIMILE
(008)
BROADCAST REPORT 1
Total number of
pages sent to
the fax server. This mark shows the
fax has been sent to
the fax server.