Pc software, Setup (pc), Setup (pc) connecting to a computer – Panasonic KX-FLM600 User Manual
Page 82
82
Setup (PC)
Connecting to a computer
!
To run the Panasonic Multi-Function software (PANA LINK), you need the following software and hardware.
CPU:
An IBM compatible personal computer with a 486 or higher processor (Pentium is
recommended.)
Basic Software:
Microsoft Windows 95 or Windows 98 (Windows 3.1/3.11*—printer driver only)
Memory Minimum: 16 MB (32 MB or more is recommended)
Hard disk:
More than 40 MB available space
Other:
Parallel port
Panasonic Multi-Function fax machine
*Microsoft Windows operating system Version 3.1/3.11 (hereafter Windows 3.1/3.11)
Connect your personal computer to the fax machine as follows:
Printer cable
(Parallel cable)
Caution:
≥
When connecting the fax machine to your computer, use the included printer cable for reliable data
communications and compliance with FCC rules.
≥
Do not connect the printer cable to the serial port on the computer. This may cause damage to your fax
machine and computer.
To parallel port