6 troubleshooting – Philips BDP2900 User Manual

Page 17

Advertising
background image

17

English

EN

USB
‡

Compatibility: Hi-Speed USB (2.0)

‡

Class support: USB Mass Storage Class

‡

File system: FAT16, FAT32

‡

USB port: 5V , 500mA

‡

Support HDD (a portable hard disc drive):
an external power source may be needed.

Main unit
‡

Power supply rating: AC 220-240V~,
50/60Hz

‡

Power consumption: 11 W

‡

Power consumption in standby mode:
< 1 W

‡

Dimensions (w x h x d): 310 x 40 x 203
(mm)

‡

Net Weight: 1.1 kg

Accessories supplied
‡

Remote control and 2 AAA batteries

‡

User manual

Optional accessory
‡

A wireless Philips USB adapter(named
WUB1110, sold separately)
‡

Multimedia connections: Wi-Fi
802.11b/g/n

‡

Connectivity: USB

‡

Ambient temperature: 5 deg C to 40
deg C.

‡

Dongle dimensions (W x H x D):
28.4 x 82 x 13.4 mm

/DVHU 6SHFLÀFDWLRQ
‡

Laser Type (Diode): AlGaInN (BD), AlGaInP
(DVD/CD)

‡

Wave length: 405+7nm/-7nm (BD),
660+4nm/-10nm (DVD), 790+6/-6nm
(CD)

‡

Output power: 1mW (BD), 0.3mW
(DVD), 0.28mW (CD)

6 Troubleshooting

Warning

‡

Risk of electric shock. Never remove the casing of the
player.

To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. _____________________________
Serial No. ______________________________

Main unit

The buttons on this player do not work.
‡

Disconnect this player from the power
supply for a few minutes, and then
reconnect.

Picture

No picture.
‡

Make sure that the TV is switched to the
correct source input for this player. .

No picture on HDMI connection.
‡

Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.

‡

On the remote control, press and then
SUHVV ´µ QXPHULF EXWWRQV WR UHFRYHU
picture display. Or wait for 10 seconds for
auto recovery.

‡

If this player is connected to an
unauthorized display device with an HDMI
cable, the audio and video signals may not
be output.

Advertising
This manual is related to the following products: