Panasonic PT VX400NTU - Manual (Page 50)

Image adjust
50
- ENGLISH
Settings
Red
Press ▲▼ to select [Red]. 1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►. deepen red tone Maximum
value 63
Press ◄. lighten red tone
Minimum
value 0
Green
Press ▲▼ to select [Green]. 1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►.
deepen green
tone
Maximum
value 63
Press ◄.
lighten green
tone
Minimum
value 0
Blue
Press ▲▼ to select [Blue]. 1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►. deepen blue tone Maximum
value 63
Press ◄. lighten blue tone Minimum
value 0
Sharpness
Press ▲▼ to select [Sharpness]. 1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.
3 )
Operation Adjustment
Adjustment
range
Press ►.
increase the
sharpness of the
image
Maximum
value 15
Press ◄.
decrease the
sharpness of the
image
Minimum
value 0
Gamma
Press ▲▼ to select [Gamma]. 1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the gamma value
3 )
to obtain a better balance of contrast.
Adjustments can be made between z 0 and 15.
Noise reduction
Press ▲▼ to select [Noise reduction]. 1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to select the desired item.
3 )
off Disabled
L1 Lower reduction
L2 Higher reduction
Noise interference on the screen can be z
reduced. Select one of the above options to get
smoother images.
[Noise reduction] cannot be selected when z
[480p], [576p], [720p], [1035i] or [1080i] is
selected.
Note
When input video signal to the projector, [Noise z
reduction] will become available.