Hang the unit on the wall – Panasonic SC-HC35 User Manual
Page 7
7
RQ
T
X
12
60
ENGLISH
2
Measure and mark the position of the wall
mount brackets (Both sides).
≥ Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
3
Attach the wall mount bracket to the wall with 2
screws F. (Both sides)
≥ Use a spirit level to ensure both wall mount brackets are level.
≥ Use a screw which is strong enough to support the weight of at least
33 kg (72.8 lbs).
4
Fix the safety holder D onto the unit with the
safety holder screw B.
≥ Before attaching, stick the rear pads (supplied) to A.
≥ Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70 N0cm (0.5 lbf0ft).
5
Hang the unit on the wall.
Hook the unit securely onto the wall mount brackets.
≥ Connect the FM/AM antenna and the AC power supply cord to the unit
before hanging the unit onto the wall. (> 5)
≥ After hanging the unit, release your hand carefully to confirm the unit sits
securely on the wall.
6
Fix the safety holders E onto the wall mount
brackets with the safety holder screws C.
(Both sides)
≥ Screw tightening torque: 80 N0cm (0.6 lbf0ft) to 120 N0cm (0.9 lbf0ft).
7
Drive the safety holder fixing screw G to
secure the safety holder D onto the wall.
≥ Refer to step 3 for requirements before screwing.
229 mm (9
1
/
32
q)
12.5 mm (
1
/
2
q)
300 mm (11
13
/
16
q)
480 mm (19
q
)
680 mm (30
23
/
32
q)
48.5 mm
(1
29
/
32
q)
229 mm (9
1
/
32
q)
133 mm
(5
1
/
4
q)
118 mm
(4
21
/
32
q)
89 mm (3
1
/
2
q)
139 mm
(5
15
/
32
q)
At least 30 mm (1
3
/
16
q)
7.5 mm (
19
/
64
q) to 9.4 mm (
3
/
8
q)
4 mm
(
5
/
32
q)
Wall mount bracket
Safety holder
screw B
Wall
Safety holder E
Safety holder
screw C
Safety holder fixing screw G
Safety holder D
Fixed to the wall
SC-HC55_35-RQTX1260.book 7 ページ ２０１１年４月４日 月曜日 午後４時５０分