Philips AZ9214 - Manual (Page 14)

FEATURES
14
You can select up to 99 tracks and store them in
memory in a desired sequence. Any track can be stored
more than once.
1 While playback is stopped, select a track with
∞ or §.
2 Press PROGRAM to store the track.
y PROGRAM
lights up; the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press
2; to start playback of your selected tracks.
y PROGRAM
is shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected,
SELECt is displayed.
– If you try to store more than 99 tracks, FULL is displayed.
Clearing the program
1 If necessary, press
9 to stop playback.
2 Press
9 to clear the program.
y
CLEAr is displayed once,
PROGRAM
goes off
and the program is cleared.
Note: The program will also be cleared if you
– interrupt the power supply or
– open the CD lid,
– or if the set switches off automatically.
PRO
GRA
M
MO
DE
Programming track numbers
English