Philips AZ9214 - Manual (Page 18)

FEATURES
18
Use the AY 3767 cord remote control. The buttons on the remote control have the
same functions as the corresponding buttons on the CD player.
1 If necessary press
9 once or twice until the set is switched off.
2 Firmly connect the remote control to LINE OUT/p and the headphones to the
remote control’s socket.
3 Turn the volume down with VOL
F on the remote control and set VOL E on
the CD player to position 8.
You can connect your CD player to digital equipment (e.g. a CD recorder) with a
DIGITAL OPTICAL IN/AUX socket.
1 Use the mains adapter, switch ESP off and turn down the volume of the appliance
that should be connected.
2 Connect an optical cable or signal lead to the OPT OUT socket of your CD player
and to the DIGITAL OPTICAL IN/AUX socket of the other appliance.
• To adjust volume and sound, use the controls of the connected appliance.
Notes: – For analogue connections use the LINE OUT/p socket.
– Playback via OPT OUT does not work if the player is supplied by batteries.
Optical out
(not on all versions)
Remote control
(not on all versions) English