ProForm PFBE1144.0 - Manual (Page 7)

7
5. Attach the Top Backrest Support (9) and the
Handle (8) to the Backrest Frame (7) with two M6
x 27mm Flat Head Bolts (24), the Upper Bracket
(36), and two M6 Nylon Locknuts (32). Note:
Orient the Upper Bracket so that the top is
flush with the top of the Backrest Frame.
Tighten each Handle Grip (15) into the Handle
(8).
Remove the paper backing from the Backrest
Pad (22), and press the Backrest Pad onto the
Top Backrest Support (9). Note: The exercise
bench can be used after 15 minutes. Use the
exercise bench carefully for the first 24 hours
while the Backrest Pad adhesive sets com-
pletely.
5
8
7
24
24
15
15
36 9
22
32
6. Attach the Seat Support (13) to the Seat Frame
(5) with two M8 x 25mm Flat Head Bolts (33) and
two M8 Nylon Locknuts (31).
Remove the paper backing from the Seat Pad
(14), and press the Seat Pad onto the Seat
Support (13). Note: The exercise bench can be
used after 15 minutes. Use the exercise bench
carefully for the first 24 hours while the Seat
Pad adhesive sets completely.
7. Make sure that all parts are properly tightened
before you use the exercise bench.
6
33
13
14
5
31