PYLE Audio PLD193T - Manual (Page 11)

BASIC OPERATION
2-3.VOL+/VOL- & SEL BUTTON
Press it repeatedly to change audio mode through volume, bass, treble, balance,
and fader modes. Rotate VOL + /VOL- knob to adjust the selected mode.
(The corresponding value will show on the display.)
When mode has not been adjusted for several seconds, display returns to normal
radio or CD display.
Adjust volume level by using VOL + / VOL - knob..
Note: The unit is initially set to volume mode.
Press SEL button one time. Adjust bass level by using VOL + / VOL -
knob.
Press SEL button two times. Adjust treble level by using VOL + / VOL -
knob.
Press SEL button three times. Adjust sound balance between left
and right speakers by using VOL + / VOL - knob.
Press SEL button four times. Adjust sound balance between front and
rear speakers by using VOL + / VOL - knob.
A.Volume:
B.Bass:
C.Treble:
D.Balance:
E.Fader:
VOL BAS TRE BAL FAD
10
1.OPEN BUTTON
Press it to flip down the front panel then you can insert the cd disc into the cd
compartment. and you can find the EJ button , press it to eject the disc .
19 20
EJ
21
4
2
3
1
18 7 22 10 11 12
13
6 9 16
15
14
5
8
17