PYLE Audio PLD193T - Manual (Page 14)

BASIC OPERATION
13
21.RESET BUTTON
RESET button is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Note:If press RESET button , the unit can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
18.MOD BUTTON
Press it repeatedly select TV, DISC ,AUX IN , RADIO mode.
20.FLASHING LED
If the front panel is not on the main unit, LED will be flashing.
19.EJECT BUTTON
In CDP playing ,Press the eject button to eject the disc form the disc slot.
16. BUTTON
Pressing during playback will stop play temporary. Return to normal playback,
press once again.
22.ST BUTTON
Press ST button to select stereo or mono reception for radio stations.
15.PWR BUTTON
Press it to turn on the unit. Press it again to turn off.
17. / BUTTONS
A.When long Pressing the / button (more than 2 seconds ) during play.The
speed of rapid forward/reverse changes according to the disc as follow.
DVD/VCD/CD/MP3:
B.Shortly press the / button during playback to skip to next track or back
one track.(Note: In DVD mode, press continually the button twice to skip to
back one track.)
Note:For some VCD 2.0 dics (PBC-playback control),
and buttons
may be unavailable.
C.Press UP or DN button on the remote controller or / on the fornt panel
to manually tune up or down for your desired station. Press them hold for more
than 2 seconds to automatically tune up or down for the stronger station.
Normal Playback 2x 4x 8x 16x