Panasonic KX-FP215 - Manual (Page 28)

4. Fax
28
L The {AUTO ANSWER} indicator turns ON.
How faxes are received
When receiving calls, the unit will automatically answer
all calls and only receive fax documents.
Note:
L The number of rings before a call is answered in FAX
ONLY mode can be changed (feature #06 on page
37).
4.7.2 Activating TAM/FAX mode
(Telephone Answering Machine/Fax mode)
1 Make sure feature #77 is set to “ TAM/FAX” (page
41) beforehand.
2 Press {AUTO ANSWER} repeatedly to display
“
TAM/FAX MODE”.
L The display will show the ring count in TAM/FAX
mode. If you wish to change it, press {A} or {B}
repeatedly to display the desired setting, and
press {SET}.
L You can adjust the speaker volume after
changing the ring count by pressing {A} or {B}
while listening to the greeting message.
L The {AUTO ANSWER} indicator turns ON.
Note:
L The maximum incoming message recording time can
be changed (feature #10 on page 37).
How phone calls and faxes are received
When receiving calls, the unit works as an answering
machine and/or fax.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
L The answering machine will answer the call.
2. The caller can leave a message after the greeting
message.
3. The caller presses {*}{9}.
L The unit will activate the fax function.
4. The caller presses the start button to send a fax.
Changing the ring count in TAM/FAX mode
You can select from “
2” (default), “3”, “4” or “TOLL
SAVER”. This setting can be changed by feature #06 on
page 37.
–
“ TOLL SAVER”: The unit answers after 2 rings when
new messages have been recorded, and after 4 rings
when there are no new messages. If you call your
unit from a remote location to listen to new messages
(page 35), you will know that there are no messages
when the unit rings for the 3rd time. You can then
hang up without being charged for the call.
4.8 Junk fax prohibitor
(preventing fax reception from
undesired callers)
If you subscribe to Caller ID service (page 20), this
feature prevents fax reception from calls that do not
show caller information.
Additionally, the fax machine will not accept faxes
originated from numbers that match the one on a
programmable junk fax prohibitor list.
Important:
L This feature does not work when manual
reception is performed.
4.8.1 Activating the junk fax prohibitor
1 Press {MENU} repeatedly to display “ JUNK FAX
PROH.” i {>}
2 Press {A} or {B} repeatedly to select “ ON”. i
{ SET}
3 Press {MENU} to exit the program.
4.8.2 Storing undesired callers
You can register up to 10 undesired numbers from the
Caller ID list (page 20) if you do not wish to receive faxes
from them.
1 Press {MENU} repeatedly to display “ JUNK FAX
PROH.”.
2 Press {>} repeatedly to display “ JUNK LIST SET”.
i {SET}
3 Press {A} or {B} repeatedly to display the item you
wish to prevent the fax reception from. i {SET}
4 Press {STOP} to exit the program.
To display the junk fax prohibitor list
1. Press {MENU} repeatedly to display “ JUNK FAX
PROH.”.
2. Press {>} repeatedly to display “ JUNK LIST
DISP.”. i {SET}
3. Press {A} or {B} to display the item.
4. Press {MENU} to exit the program.
To print the junk fax prohibitor list
1. Press {MENU} repeatedly to display “ JUNK FAX
PROH.”.
2. Press {>} repeatedly to display “ JUNK LIST
PRINT”. i {SET}
3. Press {MENU} to exit the list.
To erase an item from the junk fax prohibitor list
1. Press {MENU} repeatedly to display “ JUNK FAX
PROH.”.
FP215-PNQX1896ZA-OI-en.book Page 28 Tuesday, December 23, 2008 11:09 AM