Panasonic KX-FP215 - Manual (Page 38)

8. Programmable Features
38
8.3 Advanced features
Feature Feature code Selection
Setting the journal
report to print
automatically {#}{ 2}{2} { 0} “ OFF”: The unit will not print a journal report, but will keep a
record of the last 30 fax transmissions and receptions.
{
1} “ ON” (default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 23).
Sending documents
overseas {#}{ 2}{3} If you cannot send a fax overseas even if the number is correct
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ NEXT FAX”: This setting is effective only for the next
attempted fax transmission. After transmission, the unit will return
to the previous setting.
{
2} “ ERROR” (default): When the previous fax transmission fails
and you wish to re-send the document.
Note:
L Calling charges may be higher than usual.
Sending a fax at a
specified time {#}{ 2}{5} This feature allows you to take advantage of low-cost calling
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{
0} “ OFF” (default)
{ 1} “ ON”
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the
desired resolution (page 23).
3. {MENU} i {#}{2}{5}
4. Press {1} to select “ ON”. i {SET}
5. Enter the fax number. i {SET}
6. Enter the transmission start time.
L Press {*} repeatedly to select “ AM” or “PM”.
7. {SET} i {MENU}
Note:
L To cancel after programming, press {STOP} then {SET}.
Setting the Caller ID list
to print automatically {#}{ 2}{6} { 0} “ OFF” (default): The Caller ID list will not be printed
automatically, but the unit will keep a record of the information for
the last 30 different callers.
{
1} “ ON”: The Caller ID list will be printed automatically each time
the unit logs 30 different callers (page 20).
Activating the
Distinctive Ring feature {#}{ 3}{1} { 0} “ OFF” (default)
{ 1} “ ON”
See page 30 for details.
Setting the ring pattern
for fax (Distinctive Ring
feature) {#}{ 3}{2} { 1} “ A”
{ 2} “ B”
{ 3} “ C”
{ 4} “ D”
{ 5} “ B-D” (default)
See page 30 for details.
FP215-PNQX1896ZA-OI-en.book Page 38 Tuesday, December 23, 2008 11:09 AM