Panasonic KX-TG6051AL - Manual (Page 41)

Useful Information
41
Charger
1 Drive the screws (not included) into
the wall.
2 Mount the charger ( A), then slide it
down ( B) and to the right (C) until it
is secure.
Headset (optional)
Connecting a headset to the handset
allows hands-free phone
conversations. We recommend using
the Panasonic headset noted on page
5.
L Headset shown is KX-TCA86AL.
Note:
L
Only telecommunications compliance
labelled headsets should be plugged
into the headset socket on the
handset.
Switching a call between the headset
and handset speakerphone
To switch to the handset speakerphone,
press {s}.
To return to the headset, press {C}.
Lanyard/strap eyelet
If you have a lanyard/strap (not
included), you can hang your handset
from your neck or wrist. Thread it
through the eyelet as shown and pull to
tighten it.
Available model:
KX-TG6052/KX-TG6053
25.4 mm
Screws
(230–240 V AC,
50/60 Hz)
A
B
C
Wall mount template for the charger
25.4 mm
TG605xAL.book Page 41 Thursday, September 27, 2007 5:49 PM