Panasonic KX-TG6051AL - Manual (Page 44)

Useful Information
44
Battery recharge
Making/answering calls, intercom
I cannot set the alarm. L In order to set the alarm, you must first set the
date and time (page 14).
L The handset has lost communication with the
base unit. Move closer to the base unit, and try
again.
While programming, the
handset starts to ring.
L
A call is being received. Answer the call and
start again after hanging up.
Problem Cause/solution
I fully charged the battery,
but 7 continues to flash,
or 8 is displayed. L Clean the charge contacts and charge again
(page 12).
L The battery may need to be replaced with a new
one (page 11).
The handset display is
blank. L Confirm that the battery is properly installed.
L Fully charge the battery (page 11).
While charging, the charge
indicator does not light and
“
Charge for 7h
” is
displayed.
L The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “
Charging
” is displayed.
Problem Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units. L Move the handset and base unit away from
other electrical appliances.
L Move closer to the base unit.
L Turn on the clarity booster feature (page 17).
L If your unit is connected to a telephone line with
ADSL service, we recommend connecting an
ADSL filter between the base unit and the
telephone line socket. Contact your ADSL
provider for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust it (page
28).
The base unit does not
ring. L The ringer volume is turned off. Adjust it (page
16).
Problem Cause/solution
TG605xAL.book Page 44 Thursday, September 27, 2007 5:49 PM