Assembling the manual breast pump, Manual breast pump – parts guide – Philips SCF304/02 User Manual

Page 9

Advertising
background image

Wash and sanitize all parts before use. See section titled

‘Cleaning the Manual Breast Pump’ on page 15.

16

1

Wash your hands thoroughly. Insert the white

valve into the pump body so that it fits securely into

the small round hole. Make sure the pointed side of

the valve is facing down.

2

3

Twist the milk container onto the pump body

until securely in place.To ensure that the

pump is completely stable, you can use the

stand with the 4 oz/125 ml milk container

.

4

Fit the Let-down Massage Cushion onto the pump

funnel. Secure the rim of the Let-down Massage

Cushion around the funnel, so that there are no

gaps. (This is easier if assembled while the Let-down

Massage Cushion is wet.)

5

Place the forked end of the handle under the

rounded tip of the diaphragm stem. Push down

gently on the handle until it clicks into place.

6

Click the pump cover onto the pump body.

Fit the silicone diaphragm with stem into the pump

body. Ensure a perfect seal around the rim by

pressing down with your fingers. (This is easier if

assembled while the diaphragm is wet.)

White stand

Assembling the Manual Breast Pump

White valve

Pump body

Milk container (4 oz/125 ml)

Stand (same as )

Let-down Massage Cushion

Funnel cover (same as )

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

15

Clear pump cover

Silicone diaphragm with a stem

Forked handle

You may want to use the Manual Breast Pump when you need a cord-free alternative to the
Electronic Breast Pump. While the Manual Breast Pump uses many of the same parts as the Electronic
Breast Pump, please note the parts shaded in green are specific to the Manual Breast Pump.

Parts specific to the Manual
Breast Pump are included
in a separate bag:

Cleaning the Manual Breast Pump

Caution: Do not use antibacterial or abrasive cleaners/detergents. To clean the valve, rub gently
between your fingers in warm soapy water – do not insert objects as this may cause damage.

Every time before use (including first use):

Disassemble and clean all parts of the Manual Breast Pump on the top rack of the

dishwasher, or in warm soapy water and rinse. All parts of the Manual Breast Pump

are sterilizer safe. Sanitize Manual in a Philips AVENT Steam Sterilizer (electronic

or microwave), or by boiling in water for 5 minutes.

Manual Pump

c

d

e

f

f

g

h

h

u

v

w

u

v

w

c

d

e

f

g

h

Manual Breast Pump – Parts Guide

Advertising
This manual is related to the following products: