12 connect to your pc, Connect to your pc, See the section 12 connect to – Philips WAS7500 User Manual
Page 79: Your pc in this man
12
Connect to your PC
Minimum PC requirements:
• Windows 2000 SP4 (or above) / XP SP2 / Vista
• Pentium III 500MHz processor or higher
• 256MB RAM
• CD-ROM drive
• Ethernet adapter, enabled (for wired connection) - or
• Wireless network adapter 802.11 b/g (for wireless connection)
• 500MB free hard disk space
Install WADM (Philips Wireless Audio Device Manager, see 17 FAQ)
1
Insert the PC Suite CD into the PC.
2
Follow the instructions on the PC to install WADM.
3
When the security alert message (Microsoft Windows Firewall) pops up, press Unblock to
allow the WADM application to run on the PC.
>
The Microsoft Windows Firewall is still effective and only allows the WADM to run.
Tip
You can also consult the user manual of the Microsoft Windows Firewall and manually add the
WADM application to your list of programs that are safe to run.
4
Select language and accept license terms.
5
On the Welcome screen, click Next.
>
The installation process starts automatically.
6
When installation is completed, click Quit.
Connect Center to PC (Wired connection)
Use an Ethernet cable (not supplied) to connect the WAC7500 to your PC. (Make sure that the
Ethernet port on your PC is enabled to establish WADM connection).
Wired
Router
www
Connect to your PC
75
ENGLISH